How to install a fixed shower cubicle in a corner?
Hey there! I'm a supplier of Fixed Shower Cubicles, and I've been in the business for quite a while. Today, I'm gonna share with you a step-by-step guide on how to install a fixed shower cubicle in a corner. Whether you're a DIY enthusiast or just want to understand the process before hiring a professional, this guide is for you.
Step 1: Measure and Prepare
First things first, you need to measure the corner where you plan to install the shower cubicle. Make sure the area is clean and free of any debris. Measure the height, width, and depth of the corner accurately. You want to ensure that the shower cubicle you've chosen, like the ones from our Fixed Shower Cubicles range, will fit perfectly.
It's also a good idea to check the floor for levelness. If the floor is uneven, it can cause problems with the installation and the stability of the shower cubicle. You might need to use a leveling compound to fix any unevenness.
Step 2: Gather Your Tools
Before you start the installation, gather all the tools you'll need. Here's a basic list:


- Tape measure
- Screwdriver (both flathead and Phillips)
- Drill
- Level
- Silicone sealant
- Caulking gun
- Safety goggles and gloves (safety first!)
Step 3: Assemble the Cubicle (if required)
Some fixed shower cubicles come pre-assembled, while others may require some assembly. Check the instructions that come with your cubicle. If assembly is needed, follow the steps carefully. Usually, you'll start by attaching the side panels to the base. Make sure all the screws are tightened properly, but don't over-tighten as it can damage the materials.
Step 4: Position the Base
Place the shower cubicle base in the corner. Use the level to ensure it's perfectly horizontal. If it's not level, you can adjust it by placing shims under the base. Once it's level, use silicone sealant around the edges of the base to seal it to the floor. This will prevent water from leaking under the shower.
Step 5: Install the Wall Panels
Next, it's time to install the wall panels. Start by attaching the brackets to the wall. Use the drill to make holes in the wall and insert wall plugs. Then, screw the brackets into place. Make sure the brackets are level and at the correct height according to the instructions.
Place the wall panels onto the brackets. Some panels may slide into place, while others may require screws to secure them. Follow the instructions to ensure a proper fit. Once the panels are in place, use silicone sealant around the edges where the panels meet the wall and each other. This will create a watertight seal.
Step 6: Install the Door (if applicable)
If your fixed shower cubicle comes with a door, it's time to install it. You'll usually need to attach the hinges to the door and the wall panel. Make sure the hinges are aligned properly and tightened securely. Once the hinges are in place, carefully hang the door on the hinges. Test the door to make sure it opens and closes smoothly.
Step 7: Seal the Edges
After the door is installed, go around the entire shower cubicle and apply silicone sealant to all the edges and joints. This will not only create a watertight seal but also prevent mold and mildew from forming. Use a caulking gun to apply the sealant evenly and then smooth it out with a wet finger.
Step 8: Check for Leaks
Once the installation is complete, it's important to check for leaks. Turn on the shower and let the water run for a few minutes. Check around the base, the wall panels, and the door for any signs of water leakage. If you find any leaks, you can apply more sealant to fix them.
Tips and Tricks
- Read the instructions carefully: Every shower cubicle is different, so make sure you read and follow the instructions that come with your specific model.
- Take your time: Installation can be a bit tricky, so don't rush. Take your time to ensure everything is done correctly.
- Consider hiring a professional: If you're not confident in your DIY skills, it's always a good idea to hire a professional installer.
Other Shower Enclosure Options
If a fixed shower cubicle isn't quite what you're looking for, we also offer other options. For example, our Sliding Glass Shower Screens are a great choice if you want a more modern and space-saving solution. And if you're on a budget, our Simple Shower Enclosure offers a basic but functional option.
Contact Us for Purchase and Consultation
If you're interested in purchasing a fixed shower cubicle or any of our other shower enclosure products, we'd love to hear from you. We can provide you with more information, answer any questions you may have, and even help you choose the right product for your needs. Whether you're renovating your bathroom or building a new one, we've got you covered.
References
- Bathroom Fitter's Handbook
- DIY Bathroom Renovation Guidebooks
