A. Wall-Mounted Bathroom Vanity Installation Method: First, check if the wall is solid (otherwise, use a floor-standing type). Drill holes in the wall using an impact drill according to the selected hole positions (the countertop should be 83cm from the ground after installation). Insert the plugs from the wall-mounting accessories into the holes, and then tighten the cabinet to the wall with self-tapping screws. Expansion screws can also be used. After the cabinet is installed, align the countertop basin with the wooden base of the chessboard and adjust it to be level.
B. Floor-Standing Bathroom Vanity Installation Method: Lay the cabinet horizontally. Screw the cabinet legs onto the fixing plates using double-ended screws. Then, place the cabinet flat in a suitable position, with the cabinet legs as close to the outer edge of the base as possible to ensure even weight distribution. Adjust to level using the anchor screws. Check that all four legs are stable during placement. If they are not on the same level, the cabinet will be unevenly stressed, causing the lines to twist, affecting not only aesthetics but also the lifespan of the cabinet.
